View HT305DF65-2428S_8719851.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 2016.3 ? socket header latch 1.7mm pitch, low profile wire-to-board connectors for power supplies df65 series features 1. enhanced contact reliability and lock structure the unique locking structure reinforces the engagement between the wire side portion and the header. this prevents the wire side from becoming misaligned due to stress from poorly routed wiring. (fig.1) (patented) 2. vertical mating provides superior handling the use of vertical mating style reduces assembly time and maximizes precious board space which gives designers more freedom when designing other components on the pcb. (fig.2) 3. highly reliable contact structure the two point contact structure provides optimum reliability, a low mated height of 1.8mm and an effective mating length of 0.35mm. 4. increased cable retention the header is designed to press the terminal lance down during the mating operation; this prevents the lance from moving and enhances its strength. 5. high current of max 4a (24 awg) by utilizing highly conductive material for the female terminals and suppressing the contact resistance, the df65 series can handle a maximum of 4a with 24 awg wire. 6. solder wicking prevention molding is done in a way that removes the gap between the contacts and the housing to prevent wicking. 7. prevents accidental unmating the molded structure is designed to prevent accidental unmating due to poorly routed wiring and harsh loads. 8. ul and c-ul certified 9. glow wire compliance (compliant with iec 60695-2-11) lock structure and operation vertical mating provides superior operability and maximizes board space. fig.1 fig.2 latches are deflected slightly during mating. "oetobqcbdljoxifo nbujohjtdpnqmfuf "dmjdlgffmjohxjmmcfgfmu vertical mating type horizontal mating type side view of the pcb vertical mating style allows other parts to be mounted. (enhances freedom in designing pcb) the mating face is easy to see, resulting in proper insertion. the mating face can be hard to see, which can lead to awkward insertion. unused, open area (ul, c-ul, listed) 2 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies product speci cations ratings current rating no. of contacts 24 awg 26 awg 28 awg operating temperature range operating ahumidity range 40 to 105 ? ? y 20 to 80 ? ? 3 4a 2.5a 2.5a 4 storage temperature range storage humidity range 10 to 60 ? ? y 40 to 70 ? ? 5 6 3.5a 2a 2a ul/c-ul/file no. and recognition no. ul e52653 c-ul e52653 7 voltage rating speci cation ac/dc 50v item speci cations conditions 1. insulation resistance 100m?min. measured at dc 100v 2. withstand voltage no ashover or breakdown ac 500v is applied for one minute. 3. contact resistance 10m?max. measured at 1ma and no higher than 20mv 4. vibration resistance no electrical discontinuity for more than 1? 10 cycles in each of three directions at frequency 10-55 hz, half amplitude 0.75mm 5. shock resistance no electrical discontinuity for more than 1? accelerated velocity : 490m/s 2 , for 11 ms, half-sine in 3 directions, 3 times for ea ch of the three directions 6. moisture- resistance contact resistance : 20m?max. insulation resistance : 500m?min. temperature : 40 ?? ; humidity : 90 to 95%, left as it is for 96 hours 7. temperature cycles contact resistance : 20m?max. insulation resistance : 500m?min. -55? : 30 minutes 5 - 35? : 2 - 3 minutes 85 ? : 30 minutes 5 - 35? : 2 - 3 minutes) 5 cycles 8. durability contact resistance : 20m?max. tin plated : 30 mating cycles gold plated : 50 mating cycles 9. resistance to solder heat the resin components will not become deformed or lose performance due to deformities re ow : according to the recommended temperature pro le hand soldering : temperature of soldering iron at 350??0? for 3 seconds note 1 : this is the maximum current rating while all pins are powered or used as all power lines. if you split the current ov er multiple lines, please factor in your own safety margin. please contact hirose electric, for inquiries on the assignment of pins and on the currents that can be delivered. note 2 : includes the temperature rise of power lines. note 3 : use without condensation on parts. note 4 : the storage condition refers to long-term storage of the product on the shelf before assembly. please use the operating temperature for temporary storage such as pre-assembly and during shipping. materials / finish product part materials finish ul speci cation header insulator lcp black ul94v-0 contact brass tin plated or gold plated ? crimp socket insulator lcp beige ul94v-0 crimp contact contact phosphorous bronze tin plated or gold plated ? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. ? header connector df 65 - * p - 1.7 v ^ _ ` a b c ? socket connector df 65 - * s - 1.7 c ^ _ ` a b c ? crimp contact df 65 - 2428 scf ^ _ ^ applicable wire size y 2428 24 to 28 awg _ packaging style y scf : socket contact ~ reel ~ tin plated y scfa : socket contact ~ reel ~ gold plated ^ series name df _ series no. : 65 ` number of contacts : 3, 4, 5, 6, 7 a connector type p:header b pitch : 1.7mm c mounting style y+ : smt y straight type ^ series name : df _ series no. : 65 ` number of contacts : 3, 4, 5, 6, 7 a connector type y s socket b pitch : 1.7mm c termination form y c : crimp case 3 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies straight pin header 1.65 contact no.1 vacuum nozzle area 1.62 1.605 0.25 c 6.05 5.55 a b p= 1.7 t= 0.2 part no. hrs no. no. of contacts abc df65-3p-1.7v ** 666-6004-5 ** 3 7.5 3.4 6 df65-4p-1.7v ** 666-6006-0 ** 4 9.2 5.1 7.7 df65-5p-1.7v ** 666-6001-7 ** 5 10.9 6.8 9.4 df65-6p-1.7v ** 666-6008-6 ** 6 12.6 8.5 11.1 df65-7p-1.7v ** 666-6014-9 ** 7 14.3 10.2 12.8 note 1 : this product is sold per reel with 4,000 connectors pcs/reel. please order by reel quantities. note 2 : please contact hirose representative if you have request for (78) speci cation. contact no.1 1.7 ? 0.05 b ? 0.05 0.6 +0.05 0 0.7 +0.05 0 1.025 ? 0.05 1.8 ? 0.05 5.45 ? 0.05 1 ? 0.05 <4qfdjpdbujpo/vncfs> **
5joqmbufe fncpttfeqbdlbhjoh
(pmeqmbufe fncpttfeqbdlbhjoh product label n } y to the depth of the perforation unreeling direction reel dimensions 30.4 max 24.4 +2 0 80 ? 1 380 ? 2 2 ? 0 .5 r1 n 13 ? 0.2 n21 ? 0 . 8 unreeling direction 2 ? 0.1 4 ? 0.1 12 ? 0.1 ( 24 ) 22.25 +0.2 0 11.5 ? 0.1 1.75 ? 0.1 1.5 +0.1 0 ? tape and reel dimensions ? recommended pcb layout (t=1mm) 4 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies crimp socket /? crimp contact 1.75 6.1 contact no.1 mark b a c 1.45 4.5 2.95 3 4.15 4.3 1.07 1.2 t= 0.15 0.65 2.3 0.9 1.15 0.92 part no. hrs no. no. of contacts abcd df65-3s-1.7c(**) 666-6005-8 ** 3 6.13 5.2 7.8 3.4 df65-4s-1.7c(**) 666-6007-3 ** 4 7.83 6.9 9.5 5.1 df65-5s-1.7c(**) 666-6002-0 ** 5 9.53 8.6 11.2 6.8 df65-6s-1.7c(**) 666-6009-9 ** 6 11.23 10.3 12.9 8.5 df65-7s-1.7c(**) 666-6015-1 ** 7 12.93 12 14.6 10.2 note : each package contains 100 pcs/pack. please order in full package quantities. part no. hrs no. description quantity finish rohs df65-2428scf 666-0003-2 00 reel contact 18,000 pcs/reel tin plated df65-2428scfa(**) 666-6016-4 ** reel contact 18,000 pcs/reel gold plated note : this product is sold per reel (18,000 pcs/reel), please order by reel quantities. ? applicable wire (tinned, annealed copper wire) conductor size (core structure) jacket diameter 24 awg (11 pieces/ 0.16 mm) 1.11mm 26 awg (7 pieces/ 0.16 mm) 0.98mm 28 awg (7pieces/ 0.127 mm 0.88mm note : please contact your local hirose sales rep if you plan on using wires other than those listed above. ?3fdpnnfoefexjsf ul10368 ?4usjqmfohui 1.4 to 1.8mm <4qfdjp dbujpo/vncfs> ** /pof qdtsffm
qdtsffm~(pmeqmbufe p= 1.7 d [specification number]** none : 1 package contains 100 pcs/pack 5 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies /? tooling information item part no. hrs no. applicable contact applicator ap105-df65-2428s 901-4630-0 00 df65-2428scf, df65-2428scfa press body cm-105c 901-0001-0 00 ? hand tool ht305/df65-2428s (note3) 550-0306-8 00 df65-2428scf, df65-2428scfa extraction tool df-c-po ( b ) 550-0179-2 00 df65-2428scf note 1 : hirose does not cover damage created by the use of unapproved hirose tools. please contact your local hirose sales for clari cation. note 2 : please conduct crimping work according to the "crimping work standards" and "crimping condition table". note 3 : the compatible wire is limited to ul10368, 24 to 28 awg. /? precautionary notes 1. recommended soldering pro le (compatible with lead-free soldering) [applicable conditions] 1. peak temperature : max 250? 2. heating area: 220? or above, within 60sec . 3. preheating area: 150~180? , 90~120 sec. * measurement is conducted at the contact lead part please check the mounting conditions before use, conditions such as solder paste types, manufacturer, pcb size and any other soldering materials may alter the performance of such materials. (note 1) this temperature profile is a recommended value only; please contact your hirose sales rep for more information 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: no more than 3 seconds 3. recommended screen thickness, aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture opening ratio: 100% 4. warping of pc board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5. cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact your local hirose representative prior to the use of any cleaning agents.) 6. precautions when inserting the crimp contact into the crimp socket, do not insert it at a slanted angle to maintain the reliability of its performance. please use caution when mating/unmating this connector if it has not been mounted onto the pcb, doing so could deform or damage the contacts. do not pull on the wires of this connector as this may cause damage to the connector. during the hand soldering process, make sure to not apply too much ux. doing so may cause a solder wicking problem. this product may experience some differences in color from one production lot to another. this color difference does not in uence the performance of the connector. for handling precautions to be used during the insertion/removal process, please refer to the ?f65 push-pull procedure? 6 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies 7. mating and unmating operation .bujohpqfsbujpo ? align the receptacle over the header ? insert and press down on the receptacle in the direction of the arrow. ? completed mating operation 6onbujohpqfsbujpo ? start by lifting up on the front edge of the receptacle. ? pull it upward to release the friction t lock portion. ? reinforced lock portion will then be released. continue lifting the receptacle in an upward direction. reinforced locking portion friction fit locking portion click feeling lever the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 03/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 2016.3 ? socket header latch 1.7mm pitch, low profile wire-to-board connectors for power supplies df65 series features 1. enhanced contact reliability and lock structure the unique locking structure reinforces the engagement between the wire side portion and the header. this prevents the wire side from becoming misaligned due to stress from poorly routed wiring. (fig.1) (patented) 2. vertical mating provides superior handling the use of vertical mating style reduces assembly time and maximizes precious board space which gives designers more freedom when designing other components on the pcb. (fig.2) 3. highly reliable contact structure the two point contact structure provides optimum reliability, a low mated height of 1.8mm and an effective mating length of 0.35mm. 4. increased cable retention the header is designed to press the terminal lance down during the mating operation; this prevents the lance from moving and enhances its strength. 5. high current of max 4a (24 awg) by utilizing highly conductive material for the female terminals and suppressing the contact resistance, the df65 series can handle a maximum of 4a with 24 awg wire. 6. solder wicking prevention molding is done in a way that removes the gap between the contacts and the housing to prevent wicking. 7. prevents accidental unmating the molded structure is designed to prevent accidental unmating due to poorly routed wiring and harsh loads. 8. ul and c-ul certified 9. glow wire compliance (compliant with iec 60695-2-11) lock structure and operation vertical mating provides superior operability and maximizes board space. fig.1 fig.2 latches are deflected slightly during mating. "oetobqcbdljoxifo nbujohjtdpnqmfuf "dmjdlgffmjohxjmmcfgfmu vertical mating type horizontal mating type side view of the pcb vertical mating style allows other parts to be mounted. (enhances freedom in designing pcb) the mating face is easy to see, resulting in proper insertion. the mating face can be hard to see, which can lead to awkward insertion. unused, open area (ul, c-ul, listed) 2 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies product speci cations ratings current rating no. of contacts 24 awg 26 awg 28 awg operating temperature range operating ahumidity range 40 to 105 ? ? y 20 to 80 ? ? 3 4a 2.5a 2.5a 4 storage temperature range storage humidity range 10 to 60 ? ? y 40 to 70 ? ? 5 6 3.5a 2a 2a ul/c-ul/file no. and recognition no. ul e52653 c-ul e52653 7 voltage rating speci cation ac/dc 50v item speci cations conditions 1. insulation resistance 100m?min. measured at dc 100v 2. withstand voltage no ashover or breakdown ac 500v is applied for one minute. 3. contact resistance 10m?max. measured at 1ma and no higher than 20mv 4. vibration resistance no electrical discontinuity for more than 1? 10 cycles in each of three directions at frequency 10-55 hz, half amplitude 0.75mm 5. shock resistance no electrical discontinuity for more than 1? accelerated velocity : 490m/s 2 , for 11 ms, half-sine in 3 directions, 3 times for ea ch of the three directions 6. moisture- resistance contact resistance : 20m?max. insulation resistance : 500m?min. temperature : 40 ?? ; humidity : 90 to 95%, left as it is for 96 hours 7. temperature cycles contact resistance : 20m?max. insulation resistance : 500m?min. -55? : 30 minutes 5 - 35? : 2 - 3 minutes 85 ? : 30 minutes 5 - 35? : 2 - 3 minutes) 5 cycles 8. durability contact resistance : 20m?max. tin plated : 30 mating cycles gold plated : 50 mating cycles 9. resistance to solder heat the resin components will not become deformed or lose performance due to deformities re ow : according to the recommended temperature pro le hand soldering : temperature of soldering iron at 350??0? for 3 seconds note 1 : this is the maximum current rating while all pins are powered or used as all power lines. if you split the current ov er multiple lines, please factor in your own safety margin. please contact hirose electric, for inquiries on the assignment of pins and on the currents that can be delivered. note 2 : includes the temperature rise of power lines. note 3 : use without condensation on parts. note 4 : the storage condition refers to long-term storage of the product on the shelf before assembly. please use the operating temperature for temporary storage such as pre-assembly and during shipping. materials / finish product part materials finish ul speci cation header insulator lcp black ul94v-0 contact brass tin plated or gold plated ? crimp socket insulator lcp beige ul94v-0 crimp contact contact phosphorous bronze tin plated or gold plated ? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. ? header connector df 65 - * p - 1.7 v ^ _ ` a b c ? socket connector df 65 - * s - 1.7 c ^ _ ` a b c ? crimp contact df 65 - 2428 scf ^ _ ^ applicable wire size y 2428 24 to 28 awg _ packaging style y scf : socket contact ~ reel ~ tin plated y scfa : socket contact ~ reel ~ gold plated ^ series name df _ series no. : 65 ` number of contacts : 3, 4, 5, 6, 7 a connector type p:header b pitch : 1.7mm c mounting style y+ : smt y straight type ^ series name : df _ series no. : 65 ` number of contacts : 3, 4, 5, 6, 7 a connector type y s socket b pitch : 1.7mm c termination form y c : crimp case 3 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies straight pin header 1.65 contact no.1 vacuum nozzle area 1.62 1.605 0.25 c 6.05 5.55 a b p= 1.7 t= 0.2 part no. hrs no. no. of contacts abc df65-3p-1.7v ** 666-6004-5 ** 3 7.5 3.4 6 df65-4p-1.7v ** 666-6006-0 ** 4 9.2 5.1 7.7 df65-5p-1.7v ** 666-6001-7 ** 5 10.9 6.8 9.4 df65-6p-1.7v ** 666-6008-6 ** 6 12.6 8.5 11.1 df65-7p-1.7v ** 666-6014-9 ** 7 14.3 10.2 12.8 note 1 : this product is sold per reel with 4,000 connectors pcs/reel. please order by reel quantities. note 2 : please contact hirose representative if you have request for (78) speci cation. contact no.1 1.7 ? 0.05 b ? 0.05 0.6 +0.05 0 0.7 +0.05 0 1.025 ? 0.05 1.8 ? 0.05 5.45 ? 0.05 1 ? 0.05 <4qfdjpdbujpo/vncfs> **
5joqmbufe fncpttfeqbdlbhjoh
(pmeqmbufe fncpttfeqbdlbhjoh product label n } y to the depth of the perforation unreeling direction reel dimensions 30.4 max 24.4 +2 0 80 ? 1 380 ? 2 2 ? 0 .5 r1 n 13 ? 0.2 n21 ? 0 . 8 unreeling direction 2 ? 0.1 4 ? 0.1 12 ? 0.1 ( 24 ) 22.25 +0.2 0 11.5 ? 0.1 1.75 ? 0.1 1.5 +0.1 0 ? tape and reel dimensions ? recommended pcb layout (t=1mm) 4 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies crimp socket /? crimp contact 1.75 6.1 contact no.1 mark b a c 1.45 4.5 2.95 3 4.15 4.3 1.07 1.2 t= 0.15 0.65 2.3 0.9 1.15 0.92 part no. hrs no. no. of contacts abcd df65-3s-1.7c(**) 666-6005-8 ** 3 6.13 5.2 7.8 3.4 df65-4s-1.7c(**) 666-6007-3 ** 4 7.83 6.9 9.5 5.1 df65-5s-1.7c(**) 666-6002-0 ** 5 9.53 8.6 11.2 6.8 df65-6s-1.7c(**) 666-6009-9 ** 6 11.23 10.3 12.9 8.5 df65-7s-1.7c(**) 666-6015-1 ** 7 12.93 12 14.6 10.2 note : each package contains 100 pcs/pack. please order in full package quantities. part no. hrs no. description quantity finish rohs df65-2428scf 666-0003-2 00 reel contact 18,000 pcs/reel tin plated df65-2428scfa(**) 666-6016-4 ** reel contact 18,000 pcs/reel gold plated note : this product is sold per reel (18,000 pcs/reel), please order by reel quantities. ? applicable wire (tinned, annealed copper wire) conductor size (core structure) jacket diameter 24 awg (11 pieces/ 0.16 mm) 1.11mm 26 awg (7 pieces/ 0.16 mm) 0.98mm 28 awg (7pieces/ 0.127 mm 0.88mm note : please contact your local hirose sales rep if you plan on using wires other than those listed above. ?3fdpnnfoefexjsf ul10368 ?4usjqmfohui 1.4 to 1.8mm <4qfdjp dbujpo/vncfs> ** /pof qdtsffm
qdtsffm~(pmeqmbufe p= 1.7 d [specification number]** none : 1 package contains 100 pcs/pack 5 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies /? tooling information item part no. hrs no. applicable contact applicator ap105-df65-2428s 901-4630-0 00 df65-2428scf, df65-2428scfa press body cm-105c 901-0001-0 00 ? hand tool ht305/df65-2428s (note3) 550-0306-8 00 df65-2428scf, df65-2428scfa extraction tool df-c-po ( b ) 550-0179-2 00 df65-2428scf note 1 : hirose does not cover damage created by the use of unapproved hirose tools. please contact your local hirose sales for clari cation. note 2 : please conduct crimping work according to the "crimping work standards" and "crimping condition table". note 3 : the compatible wire is limited to ul10368, 24 to 28 awg. /? precautionary notes 1. recommended soldering pro le (compatible with lead-free soldering) [applicable conditions] 1. peak temperature : max 250? 2. heating area: 220? or above, within 60sec . 3. preheating area: 150~180? , 90~120 sec. * measurement is conducted at the contact lead part please check the mounting conditions before use, conditions such as solder paste types, manufacturer, pcb size and any other soldering materials may alter the performance of such materials. (note 1) this temperature profile is a recommended value only; please contact your hirose sales rep for more information 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: no more than 3 seconds 3. recommended screen thickness, aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture opening ratio: 100% 4. warping of pc board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5. cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact your local hirose representative prior to the use of any cleaning agents.) 6. precautions when inserting the crimp contact into the crimp socket, do not insert it at a slanted angle to maintain the reliability of its performance. please use caution when mating/unmating this connector if it has not been mounted onto the pcb, doing so could deform or damage the contacts. do not pull on the wires of this connector as this may cause damage to the connector. during the hand soldering process, make sure to not apply too much ux. doing so may cause a solder wicking problem. this product may experience some differences in color from one production lot to another. this color difference does not in uence the performance of the connector. for handling precautions to be used during the insertion/removal process, please refer to the ?f65 push-pull procedure? 6 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies 7. mating and unmating operation .bujohpqfsbujpo ? align the receptacle over the header ? insert and press down on the receptacle in the direction of the arrow. ? completed mating operation 6onbujohpqfsbujpo ? start by lifting up on the front edge of the receptacle. ? pull it upward to release the friction t lock portion. ? reinforced lock portion will then be released. continue lifting the receptacle in an upward direction. reinforced locking portion friction fit locking portion click feeling lever the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 03/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 2016.3 ? socket header latch 1.7mm pitch, low profile wire-to-board connectors for power supplies df65 series features 1. enhanced contact reliability and lock structure the unique locking structure reinforces the engagement between the wire side portion and the header. this prevents the wire side from becoming misaligned due to stress from poorly routed wiring. (fig.1) (patented) 2. vertical mating provides superior handling the use of vertical mating style reduces assembly time and maximizes precious board space which gives designers more freedom when designing other components on the pcb. (fig.2) 3. highly reliable contact structure the two point contact structure provides optimum reliability, a low mated height of 1.8mm and an effective mating length of 0.35mm. 4. increased cable retention the header is designed to press the terminal lance down during the mating operation; this prevents the lance from moving and enhances its strength. 5. high current of max 4a (24 awg) by utilizing highly conductive material for the female terminals and suppressing the contact resistance, the df65 series can handle a maximum of 4a with 24 awg wire. 6. solder wicking prevention molding is done in a way that removes the gap between the contacts and the housing to prevent wicking. 7. prevents accidental unmating the molded structure is designed to prevent accidental unmating due to poorly routed wiring and harsh loads. 8. ul and c-ul certified 9. glow wire compliance (compliant with iec 60695-2-11) lock structure and operation vertical mating provides superior operability and maximizes board space. fig.1 fig.2 latches are deflected slightly during mating. "oetobqcbdljoxifo nbujohjtdpnqmfuf "dmjdlgffmjohxjmmcfgfmu vertical mating type horizontal mating type side view of the pcb vertical mating style allows other parts to be mounted. (enhances freedom in designing pcb) the mating face is easy to see, resulting in proper insertion. the mating face can be hard to see, which can lead to awkward insertion. unused, open area (ul, c-ul, listed) 2 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies product speci cations ratings current rating no. of contacts 24 awg 26 awg 28 awg operating temperature range operating ahumidity range 40 to 105 ? ? y 20 to 80 ? ? 3 4a 2.5a 2.5a 4 storage temperature range storage humidity range 10 to 60 ? ? y 40 to 70 ? ? 5 6 3.5a 2a 2a ul/c-ul/file no. and recognition no. ul e52653 c-ul e52653 7 voltage rating speci cation ac/dc 50v item speci cations conditions 1. insulation resistance 100m?min. measured at dc 100v 2. withstand voltage no ashover or breakdown ac 500v is applied for one minute. 3. contact resistance 10m?max. measured at 1ma and no higher than 20mv 4. vibration resistance no electrical discontinuity for more than 1? 10 cycles in each of three directions at frequency 10-55 hz, half amplitude 0.75mm 5. shock resistance no electrical discontinuity for more than 1? accelerated velocity : 490m/s 2 , for 11 ms, half-sine in 3 directions, 3 times for ea ch of the three directions 6. moisture- resistance contact resistance : 20m?max. insulation resistance : 500m?min. temperature : 40 ?? ; humidity : 90 to 95%, left as it is for 96 hours 7. temperature cycles contact resistance : 20m?max. insulation resistance : 500m?min. -55? : 30 minutes 5 - 35? : 2 - 3 minutes 85 ? : 30 minutes 5 - 35? : 2 - 3 minutes) 5 cycles 8. durability contact resistance : 20m?max. tin plated : 30 mating cycles gold plated : 50 mating cycles 9. resistance to solder heat the resin components will not become deformed or lose performance due to deformities re ow : according to the recommended temperature pro le hand soldering : temperature of soldering iron at 350??0? for 3 seconds note 1 : this is the maximum current rating while all pins are powered or used as all power lines. if you split the current ov er multiple lines, please factor in your own safety margin. please contact hirose electric, for inquiries on the assignment of pins and on the currents that can be delivered. note 2 : includes the temperature rise of power lines. note 3 : use without condensation on parts. note 4 : the storage condition refers to long-term storage of the product on the shelf before assembly. please use the operating temperature for temporary storage such as pre-assembly and during shipping. materials / finish product part materials finish ul speci cation header insulator lcp black ul94v-0 contact brass tin plated or gold plated ? crimp socket insulator lcp beige ul94v-0 crimp contact contact phosphorous bronze tin plated or gold plated ? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. ? header connector df 65 - * p - 1.7 v ^ _ ` a b c ? socket connector df 65 - * s - 1.7 c ^ _ ` a b c ? crimp contact df 65 - 2428 scf ^ _ ^ applicable wire size y 2428 24 to 28 awg _ packaging style y scf : socket contact ~ reel ~ tin plated y scfa : socket contact ~ reel ~ gold plated ^ series name df _ series no. : 65 ` number of contacts : 3, 4, 5, 6, 7 a connector type p:header b pitch : 1.7mm c mounting style y+ : smt y straight type ^ series name : df _ series no. : 65 ` number of contacts : 3, 4, 5, 6, 7 a connector type y s socket b pitch : 1.7mm c termination form y c : crimp case 3 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies straight pin header 1.65 contact no.1 vacuum nozzle area 1.62 1.605 0.25 c 6.05 5.55 a b p= 1.7 t= 0.2 part no. hrs no. no. of contacts abc df65-3p-1.7v ** 666-6004-5 ** 3 7.5 3.4 6 df65-4p-1.7v ** 666-6006-0 ** 4 9.2 5.1 7.7 df65-5p-1.7v ** 666-6001-7 ** 5 10.9 6.8 9.4 df65-6p-1.7v ** 666-6008-6 ** 6 12.6 8.5 11.1 df65-7p-1.7v ** 666-6014-9 ** 7 14.3 10.2 12.8 note 1 : this product is sold per reel with 4,000 connectors pcs/reel. please order by reel quantities. note 2 : please contact hirose representative if you have request for (78) speci cation. contact no.1 1.7 ? 0.05 b ? 0.05 0.6 +0.05 0 0.7 +0.05 0 1.025 ? 0.05 1.8 ? 0.05 5.45 ? 0.05 1 ? 0.05 <4qfdjpdbujpo/vncfs> **
5joqmbufe fncpttfeqbdlbhjoh
(pmeqmbufe fncpttfeqbdlbhjoh product label n } y to the depth of the perforation unreeling direction reel dimensions 30.4 max 24.4 +2 0 80 ? 1 380 ? 2 2 ? 0 .5 r1 n 13 ? 0.2 n21 ? 0 . 8 unreeling direction 2 ? 0.1 4 ? 0.1 12 ? 0.1 ( 24 ) 22.25 +0.2 0 11.5 ? 0.1 1.75 ? 0.1 1.5 +0.1 0 ? tape and reel dimensions ? recommended pcb layout (t=1mm) 4 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies crimp socket /? crimp contact 1.75 6.1 contact no.1 mark b a c 1.45 4.5 2.95 3 4.15 4.3 1.07 1.2 t= 0.15 0.65 2.3 0.9 1.15 0.92 part no. hrs no. no. of contacts abcd df65-3s-1.7c(**) 666-6005-8 ** 3 6.13 5.2 7.8 3.4 df65-4s-1.7c(**) 666-6007-3 ** 4 7.83 6.9 9.5 5.1 df65-5s-1.7c(**) 666-6002-0 ** 5 9.53 8.6 11.2 6.8 df65-6s-1.7c(**) 666-6009-9 ** 6 11.23 10.3 12.9 8.5 df65-7s-1.7c(**) 666-6015-1 ** 7 12.93 12 14.6 10.2 note : each package contains 100 pcs/pack. please order in full package quantities. part no. hrs no. description quantity finish rohs df65-2428scf 666-0003-2 00 reel contact 18,000 pcs/reel tin plated df65-2428scfa(**) 666-6016-4 ** reel contact 18,000 pcs/reel gold plated note : this product is sold per reel (18,000 pcs/reel), please order by reel quantities. ? applicable wire (tinned, annealed copper wire) conductor size (core structure) jacket diameter 24 awg (11 pieces/ 0.16 mm) 1.11mm 26 awg (7 pieces/ 0.16 mm) 0.98mm 28 awg (7pieces/ 0.127 mm 0.88mm note : please contact your local hirose sales rep if you plan on using wires other than those listed above. ?3fdpnnfoefexjsf ul10368 ?4usjqmfohui 1.4 to 1.8mm <4qfdjp dbujpo/vncfs> ** /pof qdtsffm
qdtsffm~(pmeqmbufe p= 1.7 d [specification number]** none : 1 package contains 100 pcs/pack 5 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies /? tooling information item part no. hrs no. applicable contact applicator ap105-df65-2428s 901-4630-0 00 df65-2428scf, df65-2428scfa press body cm-105c 901-0001-0 00 ? hand tool ht305/df65-2428s (note3) 550-0306-8 00 df65-2428scf, df65-2428scfa extraction tool df-c-po ( b ) 550-0179-2 00 df65-2428scf note 1 : hirose does not cover damage created by the use of unapproved hirose tools. please contact your local hirose sales for clari cation. note 2 : please conduct crimping work according to the "crimping work standards" and "crimping condition table". note 3 : the compatible wire is limited to ul10368, 24 to 28 awg. /? precautionary notes 1. recommended soldering pro le (compatible with lead-free soldering) [applicable conditions] 1. peak temperature : max 250? 2. heating area: 220? or above, within 60sec . 3. preheating area: 150~180? , 90~120 sec. * measurement is conducted at the contact lead part please check the mounting conditions before use, conditions such as solder paste types, manufacturer, pcb size and any other soldering materials may alter the performance of such materials. (note 1) this temperature profile is a recommended value only; please contact your hirose sales rep for more information 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: no more than 3 seconds 3. recommended screen thickness, aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture opening ratio: 100% 4. warping of pc board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5. cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact your local hirose representative prior to the use of any cleaning agents.) 6. precautions when inserting the crimp contact into the crimp socket, do not insert it at a slanted angle to maintain the reliability of its performance. please use caution when mating/unmating this connector if it has not been mounted onto the pcb, doing so could deform or damage the contacts. do not pull on the wires of this connector as this may cause damage to the connector. during the hand soldering process, make sure to not apply too much ux. doing so may cause a solder wicking problem. this product may experience some differences in color from one production lot to another. this color difference does not in uence the performance of the connector. for handling precautions to be used during the insertion/removal process, please refer to the ?f65 push-pull procedure? 6 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies 7. mating and unmating operation .bujohpqfsbujpo ? align the receptacle over the header ? insert and press down on the receptacle in the direction of the arrow. ? completed mating operation 6onbujohpqfsbujpo ? start by lifting up on the front edge of the receptacle. ? pull it upward to release the friction t lock portion. ? reinforced lock portion will then be released. continue lifting the receptacle in an upward direction. reinforced locking portion friction fit locking portion click feeling lever the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 03/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 2016.3 ? socket header latch 1.7mm pitch, low profile wire-to-board connectors for power supplies df65 series features 1. enhanced contact reliability and lock structure the unique locking structure reinforces the engagement between the wire side portion and the header. this prevents the wire side from becoming misaligned due to stress from poorly routed wiring. (fig.1) (patented) 2. vertical mating provides superior handling the use of vertical mating style reduces assembly time and maximizes precious board space which gives designers more freedom when designing other components on the pcb. (fig.2) 3. highly reliable contact structure the two point contact structure provides optimum reliability, a low mated height of 1.8mm and an effective mating length of 0.35mm. 4. increased cable retention the header is designed to press the terminal lance down during the mating operation; this prevents the lance from moving and enhances its strength. 5. high current of max 4a (24 awg) by utilizing highly conductive material for the female terminals and suppressing the contact resistance, the df65 series can handle a maximum of 4a with 24 awg wire. 6. solder wicking prevention molding is done in a way that removes the gap between the contacts and the housing to prevent wicking. 7. prevents accidental unmating the molded structure is designed to prevent accidental unmating due to poorly routed wiring and harsh loads. 8. ul and c-ul certified 9. glow wire compliance (compliant with iec 60695-2-11) lock structure and operation vertical mating provides superior operability and maximizes board space. fig.1 fig.2 latches are deflected slightly during mating. "oetobqcbdljoxifo nbujohjtdpnqmfuf "dmjdlgffmjohxjmmcfgfmu vertical mating type horizontal mating type side view of the pcb vertical mating style allows other parts to be mounted. (enhances freedom in designing pcb) the mating face is easy to see, resulting in proper insertion. the mating face can be hard to see, which can lead to awkward insertion. unused, open area (ul, c-ul, listed) 2 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies product speci cations ratings current rating no. of contacts 24 awg 26 awg 28 awg operating temperature range operating ahumidity range 40 to 105 ? ? y 20 to 80 ? ? 3 4a 2.5a 2.5a 4 storage temperature range storage humidity range 10 to 60 ? ? y 40 to 70 ? ? 5 6 3.5a 2a 2a ul/c-ul/file no. and recognition no. ul e52653 c-ul e52653 7 voltage rating speci cation ac/dc 50v item speci cations conditions 1. insulation resistance 100m?min. measured at dc 100v 2. withstand voltage no ashover or breakdown ac 500v is applied for one minute. 3. contact resistance 10m?max. measured at 1ma and no higher than 20mv 4. vibration resistance no electrical discontinuity for more than 1? 10 cycles in each of three directions at frequency 10-55 hz, half amplitude 0.75mm 5. shock resistance no electrical discontinuity for more than 1? accelerated velocity : 490m/s 2 , for 11 ms, half-sine in 3 directions, 3 times for ea ch of the three directions 6. moisture- resistance contact resistance : 20m?max. insulation resistance : 500m?min. temperature : 40 ?? ; humidity : 90 to 95%, left as it is for 96 hours 7. temperature cycles contact resistance : 20m?max. insulation resistance : 500m?min. -55? : 30 minutes 5 - 35? : 2 - 3 minutes 85 ? : 30 minutes 5 - 35? : 2 - 3 minutes) 5 cycles 8. durability contact resistance : 20m?max. tin plated : 30 mating cycles gold plated : 50 mating cycles 9. resistance to solder heat the resin components will not become deformed or lose performance due to deformities re ow : according to the recommended temperature pro le hand soldering : temperature of soldering iron at 350??0? for 3 seconds note 1 : this is the maximum current rating while all pins are powered or used as all power lines. if you split the current ov er multiple lines, please factor in your own safety margin. please contact hirose electric, for inquiries on the assignment of pins and on the currents that can be delivered. note 2 : includes the temperature rise of power lines. note 3 : use without condensation on parts. note 4 : the storage condition refers to long-term storage of the product on the shelf before assembly. please use the operating temperature for temporary storage such as pre-assembly and during shipping. materials / finish product part materials finish ul speci cation header insulator lcp black ul94v-0 contact brass tin plated or gold plated ? crimp socket insulator lcp beige ul94v-0 crimp contact contact phosphorous bronze tin plated or gold plated ? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. ? header connector df 65 - * p - 1.7 v ^ _ ` a b c ? socket connector df 65 - * s - 1.7 c ^ _ ` a b c ? crimp contact df 65 - 2428 scf ^ _ ^ applicable wire size y 2428 24 to 28 awg _ packaging style y scf : socket contact ~ reel ~ tin plated y scfa : socket contact ~ reel ~ gold plated ^ series name df _ series no. : 65 ` number of contacts : 3, 4, 5, 6, 7 a connector type p:header b pitch : 1.7mm c mounting style y+ : smt y straight type ^ series name : df _ series no. : 65 ` number of contacts : 3, 4, 5, 6, 7 a connector type y s socket b pitch : 1.7mm c termination form y c : crimp case 3 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies straight pin header 1.65 contact no.1 vacuum nozzle area 1.62 1.605 0.25 c 6.05 5.55 a b p= 1.7 t= 0.2 part no. hrs no. no. of contacts abc df65-3p-1.7v ** 666-6004-5 ** 3 7.5 3.4 6 df65-4p-1.7v ** 666-6006-0 ** 4 9.2 5.1 7.7 df65-5p-1.7v ** 666-6001-7 ** 5 10.9 6.8 9.4 df65-6p-1.7v ** 666-6008-6 ** 6 12.6 8.5 11.1 df65-7p-1.7v ** 666-6014-9 ** 7 14.3 10.2 12.8 note 1 : this product is sold per reel with 4,000 connectors pcs/reel. please order by reel quantities. note 2 : please contact hirose representative if you have request for (78) speci cation. contact no.1 1.7 ? 0.05 b ? 0.05 0.6 +0.05 0 0.7 +0.05 0 1.025 ? 0.05 1.8 ? 0.05 5.45 ? 0.05 1 ? 0.05 <4qfdjpdbujpo/vncfs> **
5joqmbufe fncpttfeqbdlbhjoh
(pmeqmbufe fncpttfeqbdlbhjoh product label n } y to the depth of the perforation unreeling direction reel dimensions 30.4 max 24.4 +2 0 80 ? 1 380 ? 2 2 ? 0 .5 r1 n 13 ? 0.2 n21 ? 0 . 8 unreeling direction 2 ? 0.1 4 ? 0.1 12 ? 0.1 ( 24 ) 22.25 +0.2 0 11.5 ? 0.1 1.75 ? 0.1 1.5 +0.1 0 ? tape and reel dimensions ? recommended pcb layout (t=1mm) 4 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies crimp socket /? crimp contact 1.75 6.1 contact no.1 mark b a c 1.45 4.5 2.95 3 4.15 4.3 1.07 1.2 t= 0.15 0.65 2.3 0.9 1.15 0.92 part no. hrs no. no. of contacts abcd df65-3s-1.7c(**) 666-6005-8 ** 3 6.13 5.2 7.8 3.4 df65-4s-1.7c(**) 666-6007-3 ** 4 7.83 6.9 9.5 5.1 df65-5s-1.7c(**) 666-6002-0 ** 5 9.53 8.6 11.2 6.8 df65-6s-1.7c(**) 666-6009-9 ** 6 11.23 10.3 12.9 8.5 df65-7s-1.7c(**) 666-6015-1 ** 7 12.93 12 14.6 10.2 note : each package contains 100 pcs/pack. please order in full package quantities. part no. hrs no. description quantity finish rohs df65-2428scf 666-0003-2 00 reel contact 18,000 pcs/reel tin plated df65-2428scfa(**) 666-6016-4 ** reel contact 18,000 pcs/reel gold plated note : this product is sold per reel (18,000 pcs/reel), please order by reel quantities. ? applicable wire (tinned, annealed copper wire) conductor size (core structure) jacket diameter 24 awg (11 pieces/ 0.16 mm) 1.11mm 26 awg (7 pieces/ 0.16 mm) 0.98mm 28 awg (7pieces/ 0.127 mm 0.88mm note : please contact your local hirose sales rep if you plan on using wires other than those listed above. ?3fdpnnfoefexjsf ul10368 ?4usjqmfohui 1.4 to 1.8mm <4qfdjp dbujpo/vncfs> ** /pof qdtsffm
qdtsffm~(pmeqmbufe p= 1.7 d [specification number]** none : 1 package contains 100 pcs/pack 5 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies /? tooling information item part no. hrs no. applicable contact applicator ap105-df65-2428s 901-4630-0 00 df65-2428scf, df65-2428scfa press body cm-105c 901-0001-0 00 ? hand tool ht305/df65-2428s (note3) 550-0306-8 00 df65-2428scf, df65-2428scfa extraction tool df-c-po ( b ) 550-0179-2 00 df65-2428scf note 1 : hirose does not cover damage created by the use of unapproved hirose tools. please contact your local hirose sales for clari cation. note 2 : please conduct crimping work according to the "crimping work standards" and "crimping condition table". note 3 : the compatible wire is limited to ul10368, 24 to 28 awg. /? precautionary notes 1. recommended soldering pro le (compatible with lead-free soldering) [applicable conditions] 1. peak temperature : max 250? 2. heating area: 220? or above, within 60sec . 3. preheating area: 150~180? , 90~120 sec. * measurement is conducted at the contact lead part please check the mounting conditions before use, conditions such as solder paste types, manufacturer, pcb size and any other soldering materials may alter the performance of such materials. (note 1) this temperature profile is a recommended value only; please contact your hirose sales rep for more information 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: no more than 3 seconds 3. recommended screen thickness, aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture opening ratio: 100% 4. warping of pc board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5. cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact your local hirose representative prior to the use of any cleaning agents.) 6. precautions when inserting the crimp contact into the crimp socket, do not insert it at a slanted angle to maintain the reliability of its performance. please use caution when mating/unmating this connector if it has not been mounted onto the pcb, doing so could deform or damage the contacts. do not pull on the wires of this connector as this may cause damage to the connector. during the hand soldering process, make sure to not apply too much ux. doing so may cause a solder wicking problem. this product may experience some differences in color from one production lot to another. this color difference does not in uence the performance of the connector. for handling precautions to be used during the insertion/removal process, please refer to the ?f65 push-pull procedure? 6 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies 7. mating and unmating operation .bujohpqfsbujpo ? align the receptacle over the header ? insert and press down on the receptacle in the direction of the arrow. ? completed mating operation 6onbujohpqfsbujpo ? start by lifting up on the front edge of the receptacle. ? pull it upward to release the friction t lock portion. ? reinforced lock portion will then be released. continue lifting the receptacle in an upward direction. reinforced locking portion friction fit locking portion click feeling lever the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 03/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 2016.3 ? socket header latch 1.7mm pitch, low profile wire-to-board connectors for power supplies df65 series features 1. enhanced contact reliability and lock structure the unique locking structure reinforces the engagement between the wire side portion and the header. this prevents the wire side from becoming misaligned due to stress from poorly routed wiring. (fig.1) (patented) 2. vertical mating provides superior handling the use of vertical mating style reduces assembly time and maximizes precious board space which gives designers more freedom when designing other components on the pcb. (fig.2) 3. highly reliable contact structure the two point contact structure provides optimum reliability, a low mated height of 1.8mm and an effective mating length of 0.35mm. 4. increased cable retention the header is designed to press the terminal lance down during the mating operation; this prevents the lance from moving and enhances its strength. 5. high current of max 4a (24 awg) by utilizing highly conductive material for the female terminals and suppressing the contact resistance, the df65 series can handle a maximum of 4a with 24 awg wire. 6. solder wicking prevention molding is done in a way that removes the gap between the contacts and the housing to prevent wicking. 7. prevents accidental unmating the molded structure is designed to prevent accidental unmating due to poorly routed wiring and harsh loads. 8. ul and c-ul certified 9. glow wire compliance (compliant with iec 60695-2-11) lock structure and operation vertical mating provides superior operability and maximizes board space. fig.1 fig.2 latches are deflected slightly during mating. "oetobqcbdljoxifo nbujohjtdpnqmfuf "dmjdlgffmjohxjmmcfgfmu vertical mating type horizontal mating type side view of the pcb vertical mating style allows other parts to be mounted. (enhances freedom in designing pcb) the mating face is easy to see, resulting in proper insertion. the mating face can be hard to see, which can lead to awkward insertion. unused, open area (ul, c-ul, listed) 2 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies product speci cations ratings current rating no. of contacts 24 awg 26 awg 28 awg operating temperature range operating ahumidity range 40 to 105 ? ? y 20 to 80 ? ? 3 4a 2.5a 2.5a 4 storage temperature range storage humidity range 10 to 60 ? ? y 40 to 70 ? ? 5 6 3.5a 2a 2a ul/c-ul/file no. and recognition no. ul e52653 c-ul e52653 7 voltage rating speci cation ac/dc 50v item speci cations conditions 1. insulation resistance 100m?min. measured at dc 100v 2. withstand voltage no ashover or breakdown ac 500v is applied for one minute. 3. contact resistance 10m?max. measured at 1ma and no higher than 20mv 4. vibration resistance no electrical discontinuity for more than 1? 10 cycles in each of three directions at frequency 10-55 hz, half amplitude 0.75mm 5. shock resistance no electrical discontinuity for more than 1? accelerated velocity : 490m/s 2 , for 11 ms, half-sine in 3 directions, 3 times for ea ch of the three directions 6. moisture- resistance contact resistance : 20m?max. insulation resistance : 500m?min. temperature : 40 ?? ; humidity : 90 to 95%, left as it is for 96 hours 7. temperature cycles contact resistance : 20m?max. insulation resistance : 500m?min. -55? : 30 minutes 5 - 35? : 2 - 3 minutes 85 ? : 30 minutes 5 - 35? : 2 - 3 minutes) 5 cycles 8. durability contact resistance : 20m?max. tin plated : 30 mating cycles gold plated : 50 mating cycles 9. resistance to solder heat the resin components will not become deformed or lose performance due to deformities re ow : according to the recommended temperature pro le hand soldering : temperature of soldering iron at 350??0? for 3 seconds note 1 : this is the maximum current rating while all pins are powered or used as all power lines. if you split the current ov er multiple lines, please factor in your own safety margin. please contact hirose electric, for inquiries on the assignment of pins and on the currents that can be delivered. note 2 : includes the temperature rise of power lines. note 3 : use without condensation on parts. note 4 : the storage condition refers to long-term storage of the product on the shelf before assembly. please use the operating temperature for temporary storage such as pre-assembly and during shipping. materials / finish product part materials finish ul speci cation header insulator lcp black ul94v-0 contact brass tin plated or gold plated ? crimp socket insulator lcp beige ul94v-0 crimp contact contact phosphorous bronze tin plated or gold plated ? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. ? header connector df 65 - * p - 1.7 v ^ _ ` a b c ? socket connector df 65 - * s - 1.7 c ^ _ ` a b c ? crimp contact df 65 - 2428 scf ^ _ ^ applicable wire size y 2428 24 to 28 awg _ packaging style y scf : socket contact ~ reel ~ tin plated y scfa : socket contact ~ reel ~ gold plated ^ series name df _ series no. : 65 ` number of contacts : 3, 4, 5, 6, 7 a connector type p:header b pitch : 1.7mm c mounting style y+ : smt y straight type ^ series name : df _ series no. : 65 ` number of contacts : 3, 4, 5, 6, 7 a connector type y s socket b pitch : 1.7mm c termination form y c : crimp case 3 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies straight pin header 1.65 contact no.1 vacuum nozzle area 1.62 1.605 0.25 c 6.05 5.55 a b p= 1.7 t= 0.2 part no. hrs no. no. of contacts abc df65-3p-1.7v ** 666-6004-5 ** 3 7.5 3.4 6 df65-4p-1.7v ** 666-6006-0 ** 4 9.2 5.1 7.7 df65-5p-1.7v ** 666-6001-7 ** 5 10.9 6.8 9.4 df65-6p-1.7v ** 666-6008-6 ** 6 12.6 8.5 11.1 df65-7p-1.7v ** 666-6014-9 ** 7 14.3 10.2 12.8 note 1 : this product is sold per reel with 4,000 connectors pcs/reel. please order by reel quantities. note 2 : please contact hirose representative if you have request for (78) speci cation. contact no.1 1.7 ? 0.05 b ? 0.05 0.6 +0.05 0 0.7 +0.05 0 1.025 ? 0.05 1.8 ? 0.05 5.45 ? 0.05 1 ? 0.05 <4qfdjpdbujpo/vncfs> **
5joqmbufe fncpttfeqbdlbhjoh
(pmeqmbufe fncpttfeqbdlbhjoh product label n } y to the depth of the perforation unreeling direction reel dimensions 30.4 max 24.4 +2 0 80 ? 1 380 ? 2 2 ? 0 .5 r1 n 13 ? 0.2 n21 ? 0 . 8 unreeling direction 2 ? 0.1 4 ? 0.1 12 ? 0.1 ( 24 ) 22.25 +0.2 0 11.5 ? 0.1 1.75 ? 0.1 1.5 +0.1 0 ? tape and reel dimensions ? recommended pcb layout (t=1mm) 4 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies crimp socket /? crimp contact 1.75 6.1 contact no.1 mark b a c 1.45 4.5 2.95 3 4.15 4.3 1.07 1.2 t= 0.15 0.65 2.3 0.9 1.15 0.92 part no. hrs no. no. of contacts abcd df65-3s-1.7c(**) 666-6005-8 ** 3 6.13 5.2 7.8 3.4 df65-4s-1.7c(**) 666-6007-3 ** 4 7.83 6.9 9.5 5.1 df65-5s-1.7c(**) 666-6002-0 ** 5 9.53 8.6 11.2 6.8 df65-6s-1.7c(**) 666-6009-9 ** 6 11.23 10.3 12.9 8.5 df65-7s-1.7c(**) 666-6015-1 ** 7 12.93 12 14.6 10.2 note : each package contains 100 pcs/pack. please order in full package quantities. part no. hrs no. description quantity finish rohs df65-2428scf 666-0003-2 00 reel contact 18,000 pcs/reel tin plated df65-2428scfa(**) 666-6016-4 ** reel contact 18,000 pcs/reel gold plated note : this product is sold per reel (18,000 pcs/reel), please order by reel quantities. ? applicable wire (tinned, annealed copper wire) conductor size (core structure) jacket diameter 24 awg (11 pieces/ 0.16 mm) 1.11mm 26 awg (7 pieces/ 0.16 mm) 0.98mm 28 awg (7pieces/ 0.127 mm 0.88mm note : please contact your local hirose sales rep if you plan on using wires other than those listed above. ?3fdpnnfoefexjsf ul10368 ?4usjqmfohui 1.4 to 1.8mm <4qfdjp dbujpo/vncfs> ** /pof qdtsffm
qdtsffm~(pmeqmbufe p= 1.7 d [specification number]** none : 1 package contains 100 pcs/pack 5 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies /? tooling information item part no. hrs no. applicable contact applicator ap105-df65-2428s 901-4630-0 00 df65-2428scf, df65-2428scfa press body cm-105c 901-0001-0 00 ? hand tool ht305/df65-2428s (note3) 550-0306-8 00 df65-2428scf, df65-2428scfa extraction tool df-c-po ( b ) 550-0179-2 00 df65-2428scf note 1 : hirose does not cover damage created by the use of unapproved hirose tools. please contact your local hirose sales for clari cation. note 2 : please conduct crimping work according to the "crimping work standards" and "crimping condition table". note 3 : the compatible wire is limited to ul10368, 24 to 28 awg. /? precautionary notes 1. recommended soldering pro le (compatible with lead-free soldering) [applicable conditions] 1. peak temperature : max 250? 2. heating area: 220? or above, within 60sec . 3. preheating area: 150~180? , 90~120 sec. * measurement is conducted at the contact lead part please check the mounting conditions before use, conditions such as solder paste types, manufacturer, pcb size and any other soldering materials may alter the performance of such materials. (note 1) this temperature profile is a recommended value only; please contact your hirose sales rep for more information 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: no more than 3 seconds 3. recommended screen thickness, aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture opening ratio: 100% 4. warping of pc board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5. cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact your local hirose representative prior to the use of any cleaning agents.) 6. precautions when inserting the crimp contact into the crimp socket, do not insert it at a slanted angle to maintain the reliability of its performance. please use caution when mating/unmating this connector if it has not been mounted onto the pcb, doing so could deform or damage the contacts. do not pull on the wires of this connector as this may cause damage to the connector. during the hand soldering process, make sure to not apply too much ux. doing so may cause a solder wicking problem. this product may experience some differences in color from one production lot to another. this color difference does not in uence the performance of the connector. for handling precautions to be used during the insertion/removal process, please refer to the ?f65 push-pull procedure? 6 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies 7. mating and unmating operation .bujohpqfsbujpo ? align the receptacle over the header ? insert and press down on the receptacle in the direction of the arrow. ? completed mating operation 6onbujohpqfsbujpo ? start by lifting up on the front edge of the receptacle. ? pull it upward to release the friction t lock portion. ? reinforced lock portion will then be released. continue lifting the receptacle in an upward direction. reinforced locking portion friction fit locking portion click feeling lever the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 03/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ?
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) 1 2016.3 ? socket header latch 1.7mm pitch, low profile wire-to-board connectors for power supplies df65 series features 1. enhanced contact reliability and lock structure the unique locking structure reinforces the engagement between the wire side portion and the header. this prevents the wire side from becoming misaligned due to stress from poorly routed wiring. (fig.1) (patented) 2. vertical mating provides superior handling the use of vertical mating style reduces assembly time and maximizes precious board space which gives designers more freedom when designing other components on the pcb. (fig.2) 3. highly reliable contact structure the two point contact structure provides optimum reliability, a low mated height of 1.8mm and an effective mating length of 0.35mm. 4. increased cable retention the header is designed to press the terminal lance down during the mating operation; this prevents the lance from moving and enhances its strength. 5. high current of max 4a (24 awg) by utilizing highly conductive material for the female terminals and suppressing the contact resistance, the df65 series can handle a maximum of 4a with 24 awg wire. 6. solder wicking prevention molding is done in a way that removes the gap between the contacts and the housing to prevent wicking. 7. prevents accidental unmating the molded structure is designed to prevent accidental unmating due to poorly routed wiring and harsh loads. 8. ul and c-ul certified 9. glow wire compliance (compliant with iec 60695-2-11) lock structure and operation vertical mating provides superior operability and maximizes board space. fig.1 fig.2 latches are deflected slightly during mating. "oetobqcbdljoxifo nbujohjtdpnqmfuf "dmjdlgffmjohxjmmcfgfmu vertical mating type horizontal mating type side view of the pcb vertical mating style allows other parts to be mounted. (enhances freedom in designing pcb) the mating face is easy to see, resulting in proper insertion. the mating face can be hard to see, which can lead to awkward insertion. unused, open area (ul, c-ul, listed) 2 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies product speci cations ratings current rating no. of contacts 24 awg 26 awg 28 awg operating temperature range operating ahumidity range 40 to 105 ? ? y 20 to 80 ? ? 3 4a 2.5a 2.5a 4 storage temperature range storage humidity range 10 to 60 ? ? y 40 to 70 ? ? 5 6 3.5a 2a 2a ul/c-ul/file no. and recognition no. ul e52653 c-ul e52653 7 voltage rating speci cation ac/dc 50v item speci cations conditions 1. insulation resistance 100m?min. measured at dc 100v 2. withstand voltage no ashover or breakdown ac 500v is applied for one minute. 3. contact resistance 10m?max. measured at 1ma and no higher than 20mv 4. vibration resistance no electrical discontinuity for more than 1? 10 cycles in each of three directions at frequency 10-55 hz, half amplitude 0.75mm 5. shock resistance no electrical discontinuity for more than 1? accelerated velocity : 490m/s 2 , for 11 ms, half-sine in 3 directions, 3 times for ea ch of the three directions 6. moisture- resistance contact resistance : 20m?max. insulation resistance : 500m?min. temperature : 40 ?? ; humidity : 90 to 95%, left as it is for 96 hours 7. temperature cycles contact resistance : 20m?max. insulation resistance : 500m?min. -55? : 30 minutes 5 - 35? : 2 - 3 minutes 85 ? : 30 minutes 5 - 35? : 2 - 3 minutes) 5 cycles 8. durability contact resistance : 20m?max. tin plated : 30 mating cycles gold plated : 50 mating cycles 9. resistance to solder heat the resin components will not become deformed or lose performance due to deformities re ow : according to the recommended temperature pro le hand soldering : temperature of soldering iron at 350??0? for 3 seconds note 1 : this is the maximum current rating while all pins are powered or used as all power lines. if you split the current ov er multiple lines, please factor in your own safety margin. please contact hirose electric, for inquiries on the assignment of pins and on the currents that can be delivered. note 2 : includes the temperature rise of power lines. note 3 : use without condensation on parts. note 4 : the storage condition refers to long-term storage of the product on the shelf before assembly. please use the operating temperature for temporary storage such as pre-assembly and during shipping. materials / finish product part materials finish ul speci cation header insulator lcp black ul94v-0 contact brass tin plated or gold plated ? crimp socket insulator lcp beige ul94v-0 crimp contact contact phosphorous bronze tin plated or gold plated ? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. ? header connector df 65 - * p - 1.7 v ^ _ ` a b c ? socket connector df 65 - * s - 1.7 c ^ _ ` a b c ? crimp contact df 65 - 2428 scf ^ _ ^ applicable wire size y 2428 24 to 28 awg _ packaging style y scf : socket contact ~ reel ~ tin plated y scfa : socket contact ~ reel ~ gold plated ^ series name df _ series no. : 65 ` number of contacts : 3, 4, 5, 6, 7 a connector type p:header b pitch : 1.7mm c mounting style y+ : smt y straight type ^ series name : df _ series no. : 65 ` number of contacts : 3, 4, 5, 6, 7 a connector type y s socket b pitch : 1.7mm c termination form y c : crimp case 3 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies straight pin header 1.65 contact no.1 vacuum nozzle area 1.62 1.605 0.25 c 6.05 5.55 a b p= 1.7 t= 0.2 part no. hrs no. no. of contacts abc df65-3p-1.7v ** 666-6004-5 ** 3 7.5 3.4 6 df65-4p-1.7v ** 666-6006-0 ** 4 9.2 5.1 7.7 df65-5p-1.7v ** 666-6001-7 ** 5 10.9 6.8 9.4 df65-6p-1.7v ** 666-6008-6 ** 6 12.6 8.5 11.1 df65-7p-1.7v ** 666-6014-9 ** 7 14.3 10.2 12.8 note 1 : this product is sold per reel with 4,000 connectors pcs/reel. please order by reel quantities. note 2 : please contact hirose representative if you have request for (78) speci cation. contact no.1 1.7 ? 0.05 b ? 0.05 0.6 +0.05 0 0.7 +0.05 0 1.025 ? 0.05 1.8 ? 0.05 5.45 ? 0.05 1 ? 0.05 <4qfdjpdbujpo/vncfs> **
5joqmbufe fncpttfeqbdlbhjoh
(pmeqmbufe fncpttfeqbdlbhjoh product label n } y to the depth of the perforation unreeling direction reel dimensions 30.4 max 24.4 +2 0 80 ? 1 380 ? 2 2 ? 0 .5 r1 n 13 ? 0.2 n21 ? 0 . 8 unreeling direction 2 ? 0.1 4 ? 0.1 12 ? 0.1 ( 24 ) 22.25 +0.2 0 11.5 ? 0.1 1.75 ? 0.1 1.5 +0.1 0 ? tape and reel dimensions ? recommended pcb layout (t=1mm) 4 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies crimp socket /? crimp contact 1.75 6.1 contact no.1 mark b a c 1.45 4.5 2.95 3 4.15 4.3 1.07 1.2 t= 0.15 0.65 2.3 0.9 1.15 0.92 part no. hrs no. no. of contacts abcd df65-3s-1.7c(**) 666-6005-8 ** 3 6.13 5.2 7.8 3.4 df65-4s-1.7c(**) 666-6007-3 ** 4 7.83 6.9 9.5 5.1 df65-5s-1.7c(**) 666-6002-0 ** 5 9.53 8.6 11.2 6.8 df65-6s-1.7c(**) 666-6009-9 ** 6 11.23 10.3 12.9 8.5 df65-7s-1.7c(**) 666-6015-1 ** 7 12.93 12 14.6 10.2 note : each package contains 100 pcs/pack. please order in full package quantities. part no. hrs no. description quantity finish rohs df65-2428scf 666-0003-2 00 reel contact 18,000 pcs/reel tin plated df65-2428scfa(**) 666-6016-4 ** reel contact 18,000 pcs/reel gold plated note : this product is sold per reel (18,000 pcs/reel), please order by reel quantities. ? applicable wire (tinned, annealed copper wire) conductor size (core structure) jacket diameter 24 awg (11 pieces/ 0.16 mm) 1.11mm 26 awg (7 pieces/ 0.16 mm) 0.98mm 28 awg (7pieces/ 0.127 mm 0.88mm note : please contact your local hirose sales rep if you plan on using wires other than those listed above. ?3fdpnnfoefexjsf ul10368 ?4usjqmfohui 1.4 to 1.8mm <4qfdjp dbujpo/vncfs> ** /pof qdtsffm
qdtsffm~(pmeqmbufe p= 1.7 d [specification number]** none : 1 package contains 100 pcs/pack 5 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies /? tooling information item part no. hrs no. applicable contact applicator ap105-df65-2428s 901-4630-0 00 df65-2428scf, df65-2428scfa press body cm-105c 901-0001-0 00 ? hand tool ht305/df65-2428s (note3) 550-0306-8 00 df65-2428scf, df65-2428scfa extraction tool df-c-po ( b ) 550-0179-2 00 df65-2428scf note 1 : hirose does not cover damage created by the use of unapproved hirose tools. please contact your local hirose sales for clari cation. note 2 : please conduct crimping work according to the "crimping work standards" and "crimping condition table". note 3 : the compatible wire is limited to ul10368, 24 to 28 awg. /? precautionary notes 1. recommended soldering pro le (compatible with lead-free soldering) [applicable conditions] 1. peak temperature : max 250? 2. heating area: 220? or above, within 60sec . 3. preheating area: 150~180? , 90~120 sec. * measurement is conducted at the contact lead part please check the mounting conditions before use, conditions such as solder paste types, manufacturer, pcb size and any other soldering materials may alter the performance of such materials. (note 1) this temperature profile is a recommended value only; please contact your hirose sales rep for more information 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: no more than 3 seconds 3. recommended screen thickness, aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture opening ratio: 100% 4. warping of pc board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5. cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact your local hirose representative prior to the use of any cleaning agents.) 6. precautions when inserting the crimp contact into the crimp socket, do not insert it at a slanted angle to maintain the reliability of its performance. please use caution when mating/unmating this connector if it has not been mounted onto the pcb, doing so could deform or damage the contacts. do not pull on the wires of this connector as this may cause damage to the connector. during the hand soldering process, make sure to not apply too much ux. doing so may cause a solder wicking problem. this product may experience some differences in color from one production lot to another. this color difference does not in uence the performance of the connector. for handling precautions to be used during the insertion/removal process, please refer to the ?f65 push-pull procedure? 6 df65 series 1.7mm pitch, low profile wire-to-board connectors for power supplies 7. mating and unmating operation .bujohpqfsbujpo ? align the receptacle over the header ? insert and press down on the receptacle in the direction of the arrow. ? completed mating operation 6onbujohpqfsbujpo ? start by lifting up on the front edge of the receptacle. ? pull it upward to release the friction t lock portion. ? reinforced lock portion will then be released. continue lifting the receptacle in an upward direction. reinforced locking portion friction fit locking portion click feeling lever the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 03/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ?

▲Up To Search▲

Price & Availability of HT305DF65-2428S

	To Download HT305DF65-2428S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .